Electra Elite IPK II Document Revision 4C
Private Line 2 - 813
 14-01-09 Basic Trunk Data Setup – Private Line
Determine if a trunk should be used as a normal (0) or private (1) line.
(default: 0)
 15-06-01 Trunk Access Map for Extensions
Assign extension to have Private Line to an unused Private Line Access Map.
Trunk Access Maps: 1~200
 15-07-01 Programmable Function Keys
Make sure extension has a line key (e.g., 012) for the Private Line.
Trunks: 1~200
 21-02-01 Trunk Group Routing for Extensions
Change the routing as needed.
 22-02-01 Incoming Call Trunk Setup
Set the Trunk Service Type to 4 if routing unanswered Private Lines to voice mail or 0 if not
routing to voice mail.
Ring Groups: 1~100
 22-04-01 Incoming Extension Ring Group Assignment
Assign extension to Private Line ring group. Set the ringing in Program 22-06 – use option 1 for
Incoming or Both Ways Private Lines. Use option 0 for Outgoing Private Lines. Do not assign
any other extensions to the Private Line ring group.
 22-05-01 Incoming Trunk Ring Group Assignment
Assign Private Line to an unused Private Line ring group (i.e., a ring group just for the Private
Line)
(default: 1)
Ring Groups: 1~100
 22-07-01 DIL Assignment
If routing unanswered Private Lines to voice mail, assign DILs to the extensions.
Operation
To place a call on your Private Line:
1. Press Private Line key and then press Speaker or lift the handset.
2. Dial the number.
To answer a call on your Private Line:
1. Press Private Line key and then press Speaker or lift handset.
To Next Page
Loading...
Need help?
General
