NEC Electra Elite IPK II System - Page 848

Document Revision 4C Electra Elite IPK II
2 - 824 Pulse to Tone Conversion
Required Component(s)
COI(4/8)-U10 ETU, COID(4/8)-U10 ETU, COIB(4/8)-U( ) ETU
- OR -
TLI(2)-U( ) ETU
- OR -
DTI-U( ) ETU assigned for CO or Tie Line mode
Related Features
Central Office Calls, Placing
Multiple Trunk Types
Programming
 14-02-07 Analog Trunk Data Setup – DP to DTMF Conversion Options
For each trunk, set the type of DP to DTMF Conversion required: automatic (0), automatic and
manual (1), or manual (2).
Operation
To convert your telephone’s dialing to tone after placing your call on a pulse line:
1. Place a call over pulse line.
2. Dial
# to switch the DP trunk to DTMF dialing.