Document Revision 4C Electra Elite IPK II
2 - 860 Save Number Dialed
Related Features
Automatic Route Selection
Central Office Calls, Placing
Dial Tone Detection
Last Number Redial
Programmable Function Keys
Repeat Redial
Programming
11-12-13 Service Code Setup (for Service Access) – Saved Number Dial
Customize the service code (715 by default) to be used for dialing a saved number.
11-12-18 Service Code Setup (for Service Access) – Clear Saved Number Dialing Data
Define the service code for Clear Save Number Dialing List (785 by default) if it is not
acceptable.
15-07-01 Programmable Function Keys
Assign a function key as a Save key (code 30).
Operation
To save the outside number you just dialed (up to 24 digits):
Use this feature before hanging up.
Multiline Terminal
1. Press the Save Number Dialed key (PRG 15-07 or SC 751: 30).
Single Line Telephone
1. Hookflash.
2. Dial 715.
To Next Page
Loading...
