NEC Electra Elite IPK II System - Page 889

Electra Elite IPK II Document Revision 4C
Secondary Incoming Extension 2 - 865
 15-07-01 Programmable Function Keys
KYxx = Key Number 01~32
KY01 =
03 (Virtual Extension, 01 by default)
KY01 =
08 (CAP Key)
 15-08-01 Incoming Virtual Extension Ring Tone Setup
ICM Tone Pattern:
0 = Pattern 1 (default)
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
 15-09-01 Virtual Extension Ring Assignment
Mode1.
0 = No (default)
1 = Yes
 15-10-01 Incoming Virtual Extension Ring Tone Order Setup
Order 1 Patrn0 = Pattern 1 (default)
Order 2 Patrn1 = Pattern 2 (default
Order 3 Patrn2 = Pattern 3 (default)
Order 4 Patrn3 = Pattern 4 (default)
 15-11-01 Virtual Extension Delayed Ring Assignment
KY01 Mode1:
1 = Yes
0 = No
(default: 0)
 15-18-01 Virtual Extension Key Enhanced Options – Virtual Extension Key Operation Mode
0 = Release
1 = Land On The Key
(default: 0)
 20-04-03 System Options for Virtual Extensions – CAR/SIE/Virtual Extension Delay Interval
Delay = 10 sec (default)
 20-06-01 Class of Service for Extensions
Mode1 Class No. = 1 (default)
 20-07-10 Class of Service Options (Administrator Level) – Programmable Function Key
Programming (Appearance Level)
1 = On (default)
0 = Off
 20-10-08 Class of Service Options (Answer Service) – Virtual Extension Off-Hook Answer
0 = Off
1 = On (default)
 20-13-27 Class of Service Options (Supplementary Service) – Busy on Seizing Virtual Extension
1 = On (default)
0 = Off