NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
SNMP Simple Network Management Protocol 2 - 895
System Availability
Terminals
None
Required Component(s)
IPK II CPUII( )-U10 ETU Release 2.00 or higher.
SNMP Manager which supports SNMP V1, V2 and V3 with MD5 authentication.
Related Features
None
Programming
 10-43-01 SNMP Setting – SNMP Agent (Version 1600 or higher required)
Enable (1)/Disable (0) the SNMP Agent located on the Elite IPK II CPUII.
(default: 0)
 10-43-02 SNMP Setting – SNMP Port Number (Version 1600 or higher required)
Define the SNMP Agent Listening port.
(default: 161)
 10-43-03 SNMP Setting – Trap Destination IP Address (Version 1600 or higher required)
Define the IP Address of the Network Management Station (NMS). Sometimes called consoles,
these devices execute management applications that monitor and control network.
(default: None)
 10-43-04 SNMP Setting – Trap Destination Port Number (Version 1600 or higher required)
Define Network Management Station (NMS) destination port number for sending traps and
alarms.
(default: 162)
 10-43-05 SNMP Setting – Read Only Community Name (Version 1600 or higher required)
Define the Read Only Community Name.
(default: necpublic)

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English