NEC Electra Elite IPK II System - Page 934

Document Revision 4C Electra Elite IPK II
2 - 910 Station Add-On Console
DTR/DTH-16-2
DTR/DTH-16LD-2
Required Component(s)
D16(LD)-R( ) ADM
Related Features
One-Touch Calling
Programmable Function Keys
Programming
 11-11-17 Service Code Setup (for Setup/Entry Operation) – Programmable Function Key
Programming (Dialing 751 Service Code)
Set the service code (default 751) to assign 2-digit function codes to the Function keys.
 11-11-38 Service Code Setup (for Setup/Entry Operation) – Programmable Function Key
Programming (Dialing 852 Service Code)
Set the service code (default 752) to assign 3-digit function codes to the Function keys.
 15-07-01 Programmable Function Keys
Assign function keys to the D16(LD)-R( ) ADM.
 15-20-01 LCD Line Key Name Assignment
Assign a name to each LCD Line Key of the DTH/DTR-16LD-1 Telephone or D16(LD)-R( ) ADM.
Up to eight characters can be assigned.
(default: LK01~LK08 = CO001~CO008; LK09~LK32 are blank)
Operation
To program a key on the D16(LD)-R( ) ADM
1. Go off-hook.
2. Dial the Service Code for Programming Feature key 2-digit (751), or 3-digit (752).
3. Press the Line key to program.
4. Dial the function number.
 Refer to PRG 15-07-01 for complete operation.