NEC Electra Elite IPK II System - Page 962

Document Revision 4C Electra Elite IPK II
2 - 938 Station Relocation
Operation
To exchange two terminals:
1. Pick up the handset or press Speaker.
2. Dial the Extension Data Swap Service Code – not assigned at default (PRG 11-15-12).
3. Dial the Extension Data Swap Password – not assigned at default (PRG 92-05-01).
4. Dial the extension to be swapped with or relocated to.
5. When successfully completed, confirmation tone is heard and the display shows completed.
6. Press Speaker twice to exit.