NEC UX5000 - Connector Pin-Outs on DIOPU Blade; Installing the Direct Inward Dial Blade

2 - 72 Chapter 2
Chapter 2 - Blade Installation and Startup
2.7.3.2 Connector Pin-Outs on DIOPU Blade
2.7.3.3 Installing the Direct Inward Dial Blade:
1. Install the DIOPU blade into a slot.
● With normal operation, the status LED will flash fast. If trouble was found during the self
diagnostics routine, the status LED will flash slowly.
RJ61 Cable Connector - CN2
Line No. Pin No. Connection
15 Tip
4 Ring
23 Tip
6 Ring
32 Tip
7 Ring
41 Tip
8 Ring
12345678