NEC UX5000 - Wall Mounting the Chassis-B;E (Figure 1-47 - Figure 1-59)

Chapter 1 - Installing the Chassis
Chapter 1 1 - 35
1.7.3
Wall Mounting the Chassis-B/E (Figure 1-47 - Figure 1-59)
1. Determine the installation location for the wall bracket providing the appropriate spacing as shown below.
● It is suggested that plywood first be installed on the wall where the chassis will be positioned. This
allows for secure anchoring of the screws which will be supporting the weight of the chassis.
Figure 1-48: WALL MOUNTING 1 CHASSIS-B/E BRACKET
20”
12”
6 13/16”
13/16”
20” 20”
14 1/2”
7 15/16”2 1/2” 3 7/8”
Ceiling
Wall
Secure with Flat-head
wood screws
Secure with
Flat-head
wood screws
D
C
A
B
13/16”