2 - 102 Chapter 2
Chapter 2 - Blade Installation and Startup
● If an incorrect/old time or date is entered, after the firmware file is uploaded, the update will
change from timed to immediate.
● The time to upload a firmware package file is directly related to the file size. Generally, it takes a
few minutes.
● Remote Upgrade is supported only via LAN connection. A modem or serial connection is not
supported for Remote Upgrade.
2.9.9.2 Default Setting
At default, PCPro is set to Update Immediately after the upload.
2.9.9.3 Operation
1. Obtain the firmware package file from NEC.
2. When using a blank USB flash drive (one that does not contain previous system software
files), create two directories: FIRMWARE and MUSIC (not case sensitive) on the USB flash
drive. These directories are requires for proper file structure when the Firmware Package is
extracted.
● Any previous system files will be backed up onto the USB flash drive and then
overwritten when the Firmware Package file is extracted.
3. Open and log into PCPro.
4. Connect to the UX5000.
5. Under the Communications menu, choose the Firmware Update option.
To Next Page
Loading...
