Chapter 2 - Blade Installation and Startup
Chapter 2 2 - 99
8. If there are any existing files on the USB flash drive, you must delete or move any files off the blade
before proceeding.
9. Open the directory containing the system software files to be used for the system update.
10. Select all the files within the folder and copy them to the USB flash drive.
This can be done as follows:
- From the software directory window, click: Edit - Select All - Edit - Copy
- From the USB flash drive window, click Edit - Paste
● The files are then copied from the PC to the USB flash drive.
2.9.8 Upgrading Your Software
Figure 2-44: CCPU BLADE
As a precaution, it is recommended that the customer database be
saved prior to updating the system software. Refer to Backing Up/
Restoring a Database (page 2-97).
Load
To Next Page
Loading...
