NEC UX5000 - Installing the PSA-R Adapter; PSA-R Adapter (Figure 4-33 - Figure 4-36 - P;N 0910090 (WH) and

Chapter 4 - Terminals and Optional Equipment
Chapter 4 4 - 61
.
For specifications, refer to
UX5000 SYSTEM SPECIFICATIONS (page 6-1).
4.15.8.1 Installing the PSA-R Adapter:
1. Unplug any cables to the keyset (line cord, LAN cable, AC power).
2. Unplug the handset coil cord from the bottom of the terminal and remove the handset.
3. Turn the terminal upside down.
Option Compatibility
IP Terminal Digital Keyset
IP-CTS Enhanced Value Enhanced Value
✔✔
NA
✔
NA
Figure 4-33: PSA LAYOUT