NEC UX5000 - Securing a Single Chassis-A to the Floor (Figure 1-76)

Chapter 1 - Installing the Chassis
Chapter 1 1 - 57
1.7.8
Securing a Single Chassis-A to the Floor (Figure 1-76)
1. Install the brackets on the floor allowing for enough space surrounding the chassis to work.
2. Position the Chassis-A with the blade slots facing up.
3. As pictured in the graphic below, attach the Metal Bracket A to one of the Metal Bracket Bs using 2
screws. Then, attach the second Metal Bracket B to Bracket A.
4. Attach the brackets to the side of the Chassis-A using 4 screws.
5. Reposition the chassis so the brackets are placed on the floor.
Figure 1-76: CONNECTING THE BRACKET TO THE CHASSIS-A