4 - 86 Chapter 4
Chapter 4 - Terminals and Optional Equipment
4.19.1.2 Replacing the Faceplate:
1. Place the top edge of the faceplate into the small notches on the terminal.
2. Gently press the bottom of the faceplate down until it snaps back into place.
Figure 4-46: REPLACING THE FACEPLATE
Note: The tabs of the top of the faceplate must be installed first, then
the bottom tabs can be inserted. If the order is reversed, damage can
occur which could cause the plastic faceplate to push against buttons
preventing correct operation.
To Next Page
Loading...
