NEC UX5000 - Securing Two Chassis-B;Es to the Floor (Figure 1-85 - Figure 1-88)

1 - 64 Chapter 1
Chapter 1 - Installing the Chassis
1.7.10 Securing Two Chassis-B/Es to the Floor (Figure 1-85 - Figure 1-88)
1. Install the brackets on the floor allowing for enough space surrounding the chassis to work.
2. Turn the chassis upside down, so that the EXIFU slots are towards the top.
3. Insert Tabs c and d of the left floor bracket into Tab Holes C and D of the expansion floor bracket and
secure together with the one screw provided.
Insert Tabs a and b of the right floor bracket into Tab Holes A and B of the expansion floor bracket and
secure together with the one screw provided.
Figure 1-85: CHASSIS PLACEMENT
11.800”
19.685”
17.322” 18.818”
19.685” 19.685”
13.857”
10.472”1.692” 1.692”
2.440”
Wall
Screws
Screws
Open Space
Open SpaceOpen Space