NEC UX5000 - Page 77

Chapter 1 - Installing the Chassis
Chapter 1 1 - 65
4. Insert Tabs e and f on the floor brackets into the Tab Holes E and F at the front of the chassis. Secure the
brackets to both chassis with the 8 screws provided.
Figure 1-86: CONNECT THE MOUNTING BRACKETS TO EXPANSION FLOOR BRACKET
Figure 1-87: SECURE MOUNTING BRACKETS TO CHASSIS WITH SCREWS
Screw
Expansion Floor Bracket
Left Floor Bracket
Right Floor Bracket
Screw
Tab Hole D
Tab Hole B
Tab Hole A
Tab a
T
ab Hole C
Tab c
Tab d
Tab b
Secure with 4 screws Secure with 4 screws
Expansion Floor Bracket
Tab Hole F
Tab f
Tab Hole E
Tab e
Chassis