NEC UX5000 - Background Music; Installing Background Music (Figure 4-9)

Chapter 4 - Terminals and Optional Equipment
Chapter 4 4 - 9
SECTION 4-3
BACKGROUND MUSIC
4.3.1 Installing Background Music (Figure 4-9)
Background Music (BGM) sends music from a customer-provided music source to speakers in keysets. If an
extension user activates it, BGM plays whenever the user’s extension is idle.
1. Connecting to the CCPU:
Connect a sub-mini jack into the CN8 or CN9 connector on the CCPU to the appropriate location on the
extension cross-connect block.
2. Connect the two-conductor station cable from the cross-connect block to the external music source.
3. Install bridging clips as required.
4. Define the programming in 10-21-04 and 10-21-05 for the Background Music connection.
Figure 4-9: CCPU CONNECTIONS
✎ Refer to Background Music in the software manual for additional programming options and information.
Gbit Ethernet
<VOIPDB>
Fast Ethernet CN7
Status LED1
Status LED2
Status LED3
Status LED4
Serial CN6 (special use)
BGM/EXSP
Control Relay CN10
Aux In/Out BGM/EXSP
Control CN8
Aux In/Out BGM/EXSP
Control CN9
Load/SW1
USB CN5
VOIPDB
MEMDB
CN3
CN1
Battery
CN4
CN2
SW6
Status LED5