Chapter 4 - Terminals and Optional Equipment
Chapter 4 4 - 37
SECTION 4-12
HEADSETS
4.12.1 Connecting a Headset (Figure 4-20)
A keyset user can utilize a customer-provided headset in place of the handset. Like using Handsfree, using
the headset frees up the user’s hands for other work. However, Headset Operation provides privacy not
available from handsfree.
The headset plugs into a separate jack on the bottom of the terminal. This allows the use of the handset or
headset - whichever is convenient at the time.
Simply connect the headset into the headset jack located on the bottom of the terminal. (This jack is located
near the handset jack, so make sure to connect to the proper jack.) The headset jack is pre-amplified and the
addition of an after-market amplification device can result in poor audio performace.
Examples of compatible headsets are:
Plantronics Polaris Headsets:
Polaris SupraPlus/NC-M (monaural with noise canceling transmitter)
Polaris SupraPlus/NC-B (binaural with noise canceling transmitter)
Polaris SupraPlus/VT-M (monaural with voice tube transmitter)
Polaris Encore/VT-M (monaural with voice tube transmitter)
Polaris Encore/NC-B (binaural with noise canceling transmitter)
Polaris Tristar/VT-M (monaural with noise canceling transmitter)
Polaris Mirage/VT-M (monaural with voice tube transmitter)
Part Number
750643
750645
750644
750634
750635
750630
750631
Figure 4-20: HEADSET CONNECTION
To Next Page
Loading...
Need help?
General