2 - 74 Chapter 2
Chapter 2 - Blade Installation and Startup
Figure 2-34: 4TLIU TIE LINE BLADE INSTALLATION
Blade Maximum’s
9.5”
Chassis
19” Chassis
w/CCPU
19” Chassis
w/o CCPU
19” Chassis
x4
System Max.
w/Networking
25 6 2350
When a router or multiplexer is connected instead of a trunk, the SG terminal of the
router or multiplexer must be connected to the FG grounding terminal on the UX5000
chassis. When a tie line trunk is connected, the FG terminal must be connected to
the ground. If the FG terminal is not connected correctly, the signal may fail.
To Next Page
Loading...
