NEC UX5000 - Page 230

4 - 12 Chapter 4
Chapter 4 - Terminals and Optional Equipment
3. Follow the directions below for the type of dial pad installed.
4. Save to memory by pressing line key 2, 8, 14, or 20. The display changes back to the Service Class R/W
mode and the MW LED will be lit red.
5. Lift/replace the handset to return the terminal to idle condition.
Dial Pad Type Push LED Indication
Japanese 0 1 Line 1 LED on Red
Model A Terminal 0 2 Line 2 LED on Red
Model B UX5000 Terminal 0 3 Line 1 and 2 LED
on Red
Call Center 0 4 Line 1 LED on
Green
Hotel-1 0 5 Line 2 LED on
Green
Hotel-2 0 6 Line 1 and 2 LED
on Green
Retirement Home 0 7 Line 1 LED flashing
Red
Japan 32-Button 0 8 Line 2 LED flashing
Red
Japan Value 0 9 Line 1 and 2 LED
flashing Red
Model A Value 1 0 Line 1 LED flashing
Green
Model B Value 1 1 Line 2 LED flashing
Green
Reserve 1 2 Line 1 and 2
flashing Green