Chapter 4 - Terminals and Optional Equipment
Chapter 4 4 - 15
5. Insert the tabs of the new lower panel key module located at the top of the module into the notches on
the terminal.
6. Push the lower portion of the module down until it clicks into position.
7. Press the buttons one by one to make sure that they are not stuck or that they have too much play.
8. Replace the designation sheet and cover, and reattach the side panel.
Figure 4-12: INSTALL NEW LOWER PANEL
Figure 4-13: PRESS RETROFIT LOWER PANEL INTO PLACE
To Next Page
Loading...
