Chapter 4 - Terminals and Optional Equipment
Chapter 4 4 - 31
● 33-01-01 : ACI Port Type Setup
Set each ACI software port (1-96) for input (1) or input/output (2). Use input ports for Music on Hold
sources. Use output ports for External Paging/ringer control.
● 33-02-01 : ACI Department Calling Group
Assign ACI software ports to ACI Department Groups (1-16). This lets ACI callers connect to ACI
software ports by dialing the group’s pilot number (set in Program 11-08).
ACI Recording
● 10-07-01 : Conversation Record Circuits
Assign the number of conversation record circuits.
● 14-09-01 : ACI Conversation Recording Destination for Trunks - ACI Recording Destination
Extension Number
Use this option to assign the ACI Call Recording destination on a per trunk basis. The destination
can be an ACI port’s extension number (assigned in Program 11-06-01) or an ACI Department
Group pilot number (assigned in Program 11-08-01). If destinations are assigned in Programs 14-
09 and 15-12, the destination in Program 15-12 will be followed.
● 14-09-02 : ACI Conversation Recording Destination for Trunks - ACI Automatic Recording
for Incoming Call
Determine whether a trunk should be automatically recorded when an incoming call is received
(0=off, 1=on).
● 14-09-04 : ACI Conversation Recording Destination for Trunks - ACI Automatic Recording
for Outgoing Call
Determine whether a trunk should be automatically recorded when an outgoing call is
initiated (0=off, 1=on).
● 15-07-01 : Programmable Function Keys
If required, program an ACI Conversation Record Key (code 69 + 0). This key allows an extension
user to press the key to manually record a call to the ACI.
● 15-12-01 : Conversation Recording Destination for Extensions - ACI Recording Destination
Extension Number
Use this option to assign the ACI Call Recording destination on a per extension basis. The
destination can be an ACI port’s extension number (assigned in Program 11-06) or an ACI
Department Group pilot number (assigned in Program 11-08). If destinations are assigned in
Programs 14-09 and 15-12, the destination in Program 15-12 will be followed.
● 15-12-02 : Conversation Recording Destination for Extensions - ACI Automatic Recording
for Incoming Call
Determine whether an extension should be automatically recorded when an incoming call is
received (0=off, 1=on).
● 15-12-04 : Conversation Recording Destination for Extensions - ACI Automatic Recording
for Outgoing Call
Determine whether an extension should be automatically recorded when an outgoing call is
received (0=off, 1=on).
External Ringer
● 31-05-01 : Universal Night Answer/Ring Over Paging
For each trunk port which should ring the external ringer, enter “1”.
To Next Page
Loading...
