Chapter 1 - Installing the Chassis
Chapter 1 1 - 19
6. The metal bracket is placed on top of the batteries to hold them in place. Insert the metal tabs
of the bracket into the slots on the side of the battery compartment and lower into place. Using
the two screws provided, attach the bracket to the battery compartment.
7. Insert the battery cable through the slot on the battery compartment and connect the battery
cable to the connection points on the battery compartment.
Figure 1-20: ATTACH BRACKET WITH SCREWS
Figure 1-21: ATTACH BATTERY CABLE TO CONNECTORS
To Next Page
Loading...
