6 - 24 Chapter 6
Chapter 6 - Specifications and Parts List
ADA - Recording Adapter
Purpose
Recording of Handset/Headset/Speakerphone Speech
Target Terminal
IP-CTS and Enhanced IP Terminals
Enhanced Digital Terminals
Install Slot
Bottom Slot
Interface to Recorder
For Tape Recorder: Stereo Mini-Jack (3.5 mm diameter)
For ACD: Barrel Terminal (AMP)
Jacks
2 - Input and Output
Recording Playback
Stereo
Playback Path
When voice recording to a PC using a CTI application, it is
possible to playback through the terminal.
Feature
Voice Sent to Recorder
Hookswitch Information
Power Consumption
0.8W approximately
Power Feed / AC Adapter
Supplied by Terminal - no separate AC adapter required
(unless over 900m line length from system chassis).
Terminal Impedance
600 ohm or 30 ohm
Confirmation Tone Output
Confirmation tone to far end possible if recording device has
confirmation tone generation
Control for Recording
Recording started/stopped by off-hook or VOR
(synchronized with voice level) of the recording machine.
When the terminal is idle, no recording is done.
RoHS Compliant
Yes
Retrofit
Can connect to UX5000 terminal on an Aspire system.
To Next Page
Loading...
