Chapter 6 - Specifications and Parts List
Chapter 6 6 - 27
BCH - Bluetooth Cordless Handset with Hub
Purpose
Provide Cordless Handset Terminal Using Common
Bluetooth Technology
Cordless Handset Display
Black and White LCD
120x82 Dot Matrix Grayscale LCD with Backlit
20 digit x 2 line (5x12 dot / font): Alphanumeric
10 digit x 2 line (12x12 dot/font): Japanese Kanji
Remaining 2 lines for displaying icons
Cordless Handset Keys
8 2-Color Line Keys with LED
6 Function keys (Talk, Disconnect, Hold, etc.)
10 Key Dial Pad (-9, *, #) - Backlit
Cursor Keys (4 Direction keys and 1 Enter key)
Target Terminal
Digital Enhanced
Install Slot
Charge Cradle Connects to Handset Slot (left of
terminal - handset cradle needs to be changed) and
Interface Cable Connects to Bottom Slot
Speaker
For Ringing
Soft Keys
No
Options
No Adapters
Headset Jack
Yes
Wireless Class
1 (1mW100mW)
Distance
100 Meters Outside, 50 Meters Indoors
Maximum Units Installed
16 within above distance. No 2 devices should be
closer than 1 meter.
Bluetooth Version
2.0 Class 1
AC Adapter
Digital Terminal: 48v Power Required (when over 400
meters in line length)
Power Consumption
1.5W (with BTH which is approx. 0.5W)
Talk Time
8 hours on full charge
Charge Time
16 hours for full charge
Stand-By Time
30 hours (full charge, interval on/off)
24 hours (full charge, continuously on)
Battery
Li-Ion Battery installed on BTH
Power Feed
From digital terminal
RoHS Compliant
Yes
Retrofit
Cannot connect to Aspire keyset.
Voice Call
Handsfree with BTC Speaker Call:
Digital Terminal: Narrow band 3.4 kHz audio bandwidth
Bluetooth Headset Call:
Bluetooth headset only supports narrow band audio
To Next Page
Loading...
