1 - 22 Chapter 1
Chapter 1 - Installing the Chassis
8. Insert the cables into the chassis pull them to the right, towards the BATT connection.
9. Secure the cables to the metal wire guide/protector with tie wraps.
10. Install the metal wire guide/protector by inserting it to the left of the fan’s position. Secure it to
the chassis with the provided screw.
11. Plug the battery cable into the BATT connector.
12. Replace the metal plate containing the fan and resecure with the screw.
13. Push the battery box cage into the chassis and secure it with the 2 screws removed
previously.
Figure 1-26: INSTALLING THE SMALL BATTERY BOX
To Next Page
Loading...
