Chapter 6 - Specifications and Parts List
Chapter 6 6 - 31
PSA - PSTN Adapter for Analog Telephone
Purpose
Provide Functionality In Case of Power Failure or Down
Network
Capability for PSTN & PBX Connection in Remote Office
Target Peripheral
IP-CTS and Enhanced IP Terminals
Enhanced Digital Terminals
Install Slot
Handset Slot (left of terminal - handset cradle needs to be
changed)
Ten Key Dial Pad
Must Change Dial Pad Kit on Terminal To Dedicated
Double-Contact Dial Pad Key Without Backlit
PSTN & PBX Selection Key
Yes (surface on the cradle)
PSTN Type
Analog PSTN
Dial Method
MF/DP 20pps/10pps)
AC Adapter
Not Required
Public Standard
UL/CSA 60950, FCC Part. 15 Class B, FCC Part 68, RoHS
Single Line Telephone - DTH-1-1
Message Waiting Lamp
Lamp On (Activation Voltage): 88-108 VDC
Lamp Off (Deactivation Voltage): 53 VDC or less
SLT Adapter
Constant Current Circuit: Current fixed at 20mA / -48Vdc
Resistance (Between SLT Adapter and Telephone): 500 Ohm (loop)
Signal Method
On-Hook Condition: 48VDC
Ringer Signal: 180 Vp-p, 16Hz
SLIU BLADE / SLIDB
Signal Method
On-Hook Condition: -28VDC
Message Waiting Signal: -110VDC or FSK
Ringer Signal: 16Hz/20Hz/25Hz (based on Program 82-04-02)
75Vrms (no load condition), -28Vdc
Constant Current Type Battery Feeding: (25mA / -28Vdc)
To Next Page
Loading...
