1 - 30 Chapter 1
Chapter 1 - Installing the Chassis
16. You can increase the battery back up time by connecting each system to its own battery box.
You can also connect the chassis to customer-provided batteries using the cabling below:
Figure 1-41: MULTIPLE BATTERY BOX CONNECTIONS
Figure 1-42: CUSTOMER-PROVIDED BATTERY BOX CONNECTIONS
! Important !
● Do not pull on or carry the batteries by the battery connector cables.
●
When replacing the lid, be sure the cables are not pinched between the lid.
● After installing new batteries, write the replacement date on the lid.
To Next Page
Loading...
