Chapter 1 - Installing the Chassis
Chapter 1 1 - 41
7. There are two different styles of wall-mounting brackets for the Chassis-B/E. Style 1 as shown below is
attached to the wall and then attached to the chassis using the steps which follow. Style 2 is mounted to
the chassis and then, using the key-holes, you slide the bracket over screws which have been secured to
the wall according to the template sheet included.
Figure 1-55: TWO WALL MOUNT BRACKET STYLES
Style 1:
Mount to the wall, then the
chassis is attached to the bracket.
Style 2:
Mount to chassis, then
slide over screws secured in wall.
To Next Page
Loading...
