Chapter 1 - Installing the Chassis
Chapter 1 1 - 55
2. Turn the chassis upside down, so that the EXIFU slot is towards the top.
3. Insert Tab a of the right floor bracket into Tab Hole A of the left floor bracket and secure together with the
one screw provided.
4. Insert Tab b of the right floor bracket into the Tab Hole B at the back of the chassis. Secure the bracket to
to chassis with the 4 screws provided.
Figure 1-73: CONNECT THE MOUNTING BRACKETS WITH SCREW
Figure 1-74: SECURE MOUNTING BRACKET TO CHASSIS WITH SCREWS
Screw
Right Floor Bracket
Left Floor Bracket
Tab Hole A
Tab a
Screws (4)
Floor Bracket
Tab Hole B
Tab b
Chassis
To Next Page
Loading...
