Chapter 1 - Installing the Chassis
Chapter 1 1 - 71
3. For the plastic Chassis-B/E units, attach the 2 bar brackets at the correct positions on the rack. These will
be used to secure the chassis to the rack in their proper vertical position.
● Both standard and metric screws are provided. Use the ones required for your rack mount.
Figure 1-94: ATTACH TOP AND BOTTOM BAR BRACKETS
Top Bar Rack
Mount Bracket
Top Bar Rack
Mount Bracket
Rack Mount
Attach top bar
using 2 screws
on each side
Attach bottom bar
using 2 screws on
each side
To Next Page
Loading...
