8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Switching User Manual223
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see
Register and access the switch with your
NETGEAR account on page 34.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Switchingï€ > Multicast > MLD Snooping > Multicast Router VLAN Configuration.
7. From the Interface menu, select the interface for which you want the multicast router to be
enabled.
8. In the VLAN ID field, specify the VLAN ID.
9. From the Multicast Router menu, select to enable or disable the multicast router for the
VLAN ID.
10. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General