8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Switching User Manual228
7. Use the Search menu and field to search for a MAC address, VLAN ID, or interface number:
• Search by MAC Address. From the Search menu, select MAC Address, and enter
the 6-byte hexadecimal MAC address in two-digit groups separated by colons, for
example, 01:23:45:67:89:AB.
Then click the Go button.
If the address exists, that entry is displayed as the first entry followed by the
remaining (higher) MAC addresses.
An exact match is required.
• Search VLAN ID. From the Search menu, select VLAN ID, and enter the VLAN ID, for
example, 100. Then click the Go button.
• Search Interface. From the Search menu, select Interface, and enter the interface ID
using the respective interface naming convention (for example, g1 or l1).
Then click the
Go button.
8. To refresh the page with the latest information about the switch, click the Update button.
9. T
o clear all dynamic MAC address entries in the table, click the Clear button.
The following table describes the nonconfigurable information displayed on the page.
Table 48. MAC address table information
Field Description
Total MAC Address The number of MAC addresses learned or configured.
VLAN ID The VLAN ID associated with the MAC address.
MAC Address The unicast MAC address for which the switch holds forwarding and/or filtering
information.
The format is a 6-byte MAC address that is separated by colons, for
example 01:23:45:67:89:AB.
To Next Page
Loading...
Need help?
General