8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual324
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Security > Access > HTTPS > Certificate Management.
7. The Certificate Management page displays.
The Certificate Present field displays Yes.
8. In the Certificate Management section, select Delete Certificates radio button.
9. Click the Apply button.
The certificate is removed.
Transfer an existing certificate to the switch
You can transfer a certificate file to the switch.
For the switch to accept HTTPS connections from a device, the switch requires a public key
certificate. You can generate a certificate externally (for example, offline) and transfer it to the
switch.
Before you transfer a file from a TFTP server to the switch, the following conditions must be
true:
• The file that you transfer from a TFTP server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch contains a path to the TFTP server.
Note: Before you can transfer a certificate, you must disable HTTPS (see
Configure HTTPS access settings on page 320) and log back in to the
local browser interface over an HTTP session. After you transfer the
certificate, you can reenable HTTPS and log back in to the local
browser interface over an HTTPS session.
To Next Page
Loading...
Need help?
General