8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Monitor the Switch and the Traffic User Manual421
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
page 32.
5. Click the Login button.
The System Information page displays.
6. Select Monitoring > Ports > EAP Statistics.
The previous figure does not show all fields on the EAP Statistics page.
7. T
o refresh the page with the latest information about the switch, click the Update button.
8. T
o clear the counters, which resets the EAP and EAPoL statistics to default values, take
one of the following actions:
• T
o clear the counters for a specific port, select the check box associated with the port,
and click the Clear button.
• T
o clear the counters for multiple ports, select the check boxes associated with the
ports, and click the Clear button.
• T
o clear all counters for all ports, select the check box in the row heading, and click
the Clear button.
Clicking the button resets all statistics for all ports to default values.
The following table describes the EAP statistics displayed on the page.
Table 77. EAP statistics
Field Description
Port The port number.
EAPOL Frames Received The number of valid EAPoL frames of any type that were received by this
authenticator
.
EAPOL Frames Transmitted The number of EAPoL frames of any type that were transmitted by this
authenticator
.
To Next Page
Loading...
Need help?
General