Nordson Asymtek X-1020 User Manual

Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 4-15 P/N 196515 (Revision A)
Is the wiring as
specified in above?
Is the wiring as
specified in above?
Front EMO cable is the
root cause of system
power fault.
Verify the Front EMO
Cable is connected to Front EMO
Button.
Correct the wiring by changing
connections in accordance
with wiring specified for the
Front EMO Button.
Switch the Main Circuit Breaker
to the OFF (0) position.
Is there continuity
between the pins
specified above?
Is there continuity
between the pins
specified above?
Press the green ON (I) button on
the Operator's Console.
Does the green
ON (I) button on the
Operator's Console
stay illuminated?
Does the green
ON (I) button on the
Operator's Console
stay illuminated?
Front EMO Button (P/N
40-0016 and P/N 40-2521)
has failed.
Power Controls Cable
(P/N 06-4515-00) has
failed
Pin 22GreenPin 4
Pin 21RedPin 3
Pin 12WhitePin 2
Pin 11BlackPin 1
Front EMO
Button
Wire Color
Front EMO
Cable Connector
Verify the wiring to the Front EMO Button is connected
as specified below:
Pin 22GreenPin 4
Pin 21RedPin 3
Pin 12WhitePin 2
Pin 11BlackPin 1
Front EMO
Button
Wire Color
Front EMO
Cable Connector
Verify the wiring to the Front EMO Button is connected
as specified below:
Pin 21 to Pin 22
Pin 11 to Pin 12
Front EMO Button Pins
Verify the continuity between the Front
EMO Button pins specified below.
Pin 21 to Pin 22
Pin 11 to Pin 12
Front EMO Button Pins
Verify the continuity between the Front
EMO Button pins specified below.
Reconnect Cable (P/N 06-
4515-00) to Power Control
outlet on Power Manager.
Yes No
Yes
No
Yes
No
Diagram Sheet 4-2-8
System Power Fault Isolation Procedure - Front EMO Button Verification

Nordson Asymtek X-1020 Specifications

General

Brand	Nordson
Model	Asymtek X-1020
Category	Dispenser
Language	English