10 Océ 9300 User Manual
Buttons
‘Program’
To activate the program mode and to enter the top level menu. In
this mode, the user can use ‘next/select’ the ‘previous’ and or buttons to
step through the menu.
Press‘Program’ again. If no action takes place for 1 minute in Program mode,
the machine will return to the status mode.
Note:
If you press the Program button while the printer is printing, the LED
above the program button flashes. As soon as the printing process is ready, you
will automatically enter the program mode. Keep in mind that the printer will
not print in Program mode.
‘Next/select’
To select an option or a setting in the menu. Or, if a submenu is
present, enter a lower-level menu.
‘Previous’
Pressing this button takes you one level higher in the menu
structure.
Browse buttons or
These two buttons are used to select another mode
at the same menu level, or to display the next or previous option from the
option list.
‘Cancel/continue’
This button is used to cancel the current print job or to
continue after an operator-recoverable error.
To Next Page
Loading...
