Solving problems 93
Operator recoverable errors
The printer stops immediately when it detects an operator-recoverable error.
An error message displays on the panel. The user must take action to solve the
problem.
Message Description
ERROR FEED
TABLE
Print media in feed table or feed table not closed
Remove the paper and/or close the feed table
PAPER REMOVED
The paper has been removed from the feed table during a
print
PAPER TOO
SHORT
The print material is too short
Remove the print media
PAPER JAM
Print media has jammed in the machine
Remove the jammed media
FEED TABLE
OPEN
The feed table is not closed properly
Close the feed table
CUTTER ERROR
The print media is not properly cut
Remove the print media
ROLL EMPTY
The selected roll is empty
Remove the empty roll and place a new roll of print media
into the
roll unit
PAPER JAM ROLL
Print media has jammed in the roll unit
Remove the print media
ROLLUNIT OPEN
The roll unit is open
Close the roll unit
REFILL TONER
Add toner
OPEN ROLLUNIT
Open the roll unit to remove the print media
CHECK OUTPUT-
TRAY
Print media has jammed in the active output tray
Remove the jammed print media and press Continue
To Next Page
Loading...
