Oce 9300 - Line Attribute Settings

Customizing defaults 59
9
Press ‘next/select’ to enter the ‘
MERGE
’ menu.
10
Select ‘
YES
’ or ‘
NO
’ using the or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘Program’ to exit the main menu.
Line Attribute
This option determines whether the ends of the vectors are rounded or printed
as on an HP machine. The default setting is Océ round.
Océ round
prints all vector ends and joins rounded.
HP default
prints the vector ends and joins according to the HP standard.
▼
▼▼
▼
Setting the line attributes
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL
/2
SETUP
’ menu.
8
Select the ‘LINE ATTRIBUTE’ item using the or button.
9
Press ‘next/select’ to enter the ‘LINE ATTRIBUTE’ menu.
10
Select ‘OCE ROUND’ or ‘HP DEFAULT’ using the or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘Program’ to leave the main menu.