Oce 9300 - Turnaround Delay Setting

20 Océ 9300 User Manual
Turnaround delay
The printer offers possible delays from 0 to 10 seconds, with increments of
0.01 second. The default is 1.0.
▼
Setting the turnaround delay
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
CONNECTIONS
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTIONS
’ menu.
6
Select the ‘
SERIAL
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
SERIAL
’ menu.
8
Select the ‘
PROTOCOL
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
PROTOCOL
’ menu.
10
Select the ‘
DELAY
’ item using the or button.
11
Press ‘next/select’ to enter the ‘
DELAY
’ menu.
12
Select the ‘
TURNAROUND
’ item using the or button.
13
Press ‘next/select’ to enter the ‘
TURNAROUND
’ menu.
14
Select the required delay using the or button.
15
Press ‘next/select’ to confirm the selected delay.
16
Press ‘Program’ to leave the main menu.