Oce 9300 - HP-GL;2 Pen Priority

Customizing defaults 57
▼
▼▼
▼
Setting the HP-GL/2 page advance
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL
/2
SETUP
’ menu.
8
Select the ‘
PAGE ADVANCE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
PAGE ADVANCE
’ menu.
10
Select the required page advance using the or button.
11
Press ‘next/select’ to confirm the selected page advance.
12
Press ‘Program’ to exit the main menu.
HP-GL/2 pen priority
You can define pen parameters in the print file, either in a remote configuration
file or from the printer control panel. The pen priority option allows you to
define which set of pen parameters you want to use.
If ‘
Language’
is selected, the pen parameters defined in the data file will be
used. If ‘
Setup’
is selected, the pen parameter defined on the printer operating
panel, or in the optional remote configuration file, will be used. The default is
‘Language’.
▼
▼▼
▼
Defining HP-GL/2 pen priority
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL
/2
SETUP
’ menu.
8
Select the ‘
PEN PRIORITY
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
PEN PRIORITY
’ menu.
10
Select the required pen priority using the or button.
11
Press ‘next/select’ to confirm the selected pen priority.
12
Press ‘Program’ to exit the main menu.