Oce 9300 - Defining Language Settings; Automatic Language Sensing

48 Océ 9300 User Manual
Defining language settings
The Océ 9300 accepts print files in various data formats (languages). You can
change the settings for PostScript, VDF, BGL, HP-GL, HP-GL/2, HP-RTL,
CalComp, CALS, TIFF or EDMICS.
Automatic language sensing
Automatic language sensing (ALS) is the mechanism which the system uses to
detect the language (data format) of a file for which the format has not been
specified in the file header. ALS scans the file contents for clues about the data
format. Automatic language sensing can be switched on/off. By default, ALS
is activated.
ALS enables the printer to switch between the following languages:
■
Océ languages (VDF and BGL), PostScript, HP-GL, HP-GL/2, HP-RTL,
CalComp, CALS, TIFF or EDMICS
Use the ALS formats parameter to define which data formats are to be searched
for in the print files.
Note:
When using ALS, it is very important that every print file end with an
end-of-print instruction.
▼
▼▼
▼
Activating ALS
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
SELECT FORMAT
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
SELECT FORMAT
’ menu.
8
Select the ‘
AUTO
’ item using the or button.
9
Press ‘next/select’ to set up this mode.
10
Press ‘Program’ to exit the main menu.