Oce 9300 - HP-GL Merge Mode

Customizing defaults 55
▼
▼▼
▼
Setting the HP-GL page advance
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL SETUP
’ menu.
8
Select the required ‘
PAGE ADVANCE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
PAGE ADVANCE
’ menu.
10
Select ‘
YES
’ or ‘
NO
’ using the or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘Program’ to exit the main menu.
Merge mode
This option determines what happens when two or more colors intersect at the
same point of a plot, especially in area fills. This option is On by default.
Merge Off
Only the last color specified is printed for a given line or area. The
other colors specified for the same line or area are transparent.
Merge On
All the specified colors are blended together.
▼
▼▼
▼
Setting the merge mode
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL SETUP
’ menu.
8
Select the ‘
MERGE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
MERGE
’ menu.
10
Select ‘
YES
’ or ‘
NO
’ using the or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘Program’ to exit the main menu.