Oce 9300 - PostScript Page Layout; Default PostScript Page Size

Customizing defaults 69
PostScript page layout
The orientation of the printed page on the roll can be either landscape or
portrait.
▼
▼▼
▼
Selecting the PostScript page layout
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
PS SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
PS SETUP
’ menu.
8
Select the ‘
PAGE LAYOUT
’ item using the or button
9
Press ‘next/select’ to enter ‘
PAGE LAYOUT
’ menu
.
10
Select the required page layout using the or button.
11
Press ‘next/select’ to confirm the selected page layout.
12
Press ‘Program’ to exit the main menu.
Default PostScript page size
This option specifies the dimensions of the paper on which your document will
be printed. (For example: D, A1, 8.5x11”, etc.). This option is useful only
when the format is not specified in the PostScript file.
▼
▼▼
▼
Selecting the default PostScript page size
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
PS SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
PS SETUP
’ menu.
8
Select the ‘
DEF PAGE SIZE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
DEF PAGE SIZE
’ menu.
10
Select the required page size using the or button.
11
Press ‘next/select’ to confirm the selected page size.
12
Press ‘Program’ to exit the main menu.