Oce 9300 - Designjet Compatibility Settings; Designjet Merge Mode

58 Océ 9300 User Manual
Designjet compatibility
If you print a color data file on a black-and-white printer, the result may not be
satisfactory. If you emulate the HP 650C, all information which is defined in
color is printed in black; if you emulate the HP 750C, all information which is
defined in color will be printed in gray-scale levels.
▼
▼▼
▼
Defining Designjet compatibility
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL SETUP
’ menu.
8
Select the ‘
DESIGNJET
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
DESIGNJET
’ menu.
10
Select the required Designjet using the or button.
11
Press ‘next/select’ to confirm the selected Designjet.
12
Press ‘Program’ to exit the main menu.
Merge mode
This option determines what happens when two or more colors intersect at the
same point of a plot, especially in area fills. This option is On by default.
Merge Off
Only the last color specified is printed for a given line or area. The
other colors specified for the same line or area are transparent.
Merge On
All the specified colors are blended together.
▼
▼▼
▼
Setting the merge mode
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
HP
-
GL
/2
SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
HP
-
GL
/2
SETUP
’ menu.
8
Select the ‘
MERGE
’ item using the or button.