Oce 9300 - Media Saver Plot Size Options

78 Océ 9300 User Manual
Media saver plot size
When the media saver is set to Nesting, three paper size options are available:
‘STD NO CLIP’
The print is scaled to fit on the selected paper size. It is not
clipped.
‘STD CLIPPED’
If necessary, the print is clipped to fit onto the selected paper
size.
‘NON STANDARD’
The print is drawn as defined in the print data file. Paper
size depends on the size of the plot.
The default is ‘NON STANDARD’.
▼
Setting the media saver plot size
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
PLOT MANAGER
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
PLOT MANAGER
’ menu.
6
Select the ‘
MEDIA SAVER
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
MEDIA SAVER
’ menu.
8
Select the ‘
M
/
S PLOT SIZE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
M
/
S PLOT SIZE
’ menu
10
Select the required setting using the or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘Program’ to exit the main menu.