Oce 9300 - Media Saver Time-Out; Flush Media Saver

Advanced menu functions 77
Media saver time-out
As explained in the previous section, when the media saver queue is full, the
drawings are printed. However, to prevent unnecessary delays for prints in
partially filled queues, a time-out of 1 to 60 minutes can be set, after which the
contents of the queue are printed.
▼
Setting the media saver time-out
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
PLOT MANAGER
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
PLOT MANAGER
’ menu.
6
Select the ‘
MEDIA SAVER
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
MEDIA SAVER
’ menu.
8
Select the ‘
M
/
S TIME OUT
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
M
/
S TIME OUT
’ menu
10
Select the required value using the or button.
11
Press ‘next/select’ to confirm the selected value.
12
Press ‘Program’ to exit the main menu.
Flush media saver
This option allows the user to immediately print any print that is held in the
media saver memory.
▼
Setting the flush media saver
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
FLUSH M
.
SAVER
’ item using the or button.
3
Press ‘next/select’ to print the file being held.
4
Press ‘Program’ to exit the main menu.