Oce 9300 - Manual Data Format Selection

50 Océ 9300 User Manual
Manual data format selection
If necessary, each of the data formats can be selected manually.
Note:
In this case, ALS is inactive.
▼
▼▼
▼
Setting manual data format
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
SELECT FORMAT
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
SELECT FORMAT
’ menu.
8
Select the required language using the or button.
9
Press ‘next/select’ to confirm the selected language.
10
Press ‘Program’ to exit the main menu.
Note:
When PostScript is selected, RCF headers are not recognized.