Printing files 41
You may use the following methods to compose a header of this type:
■
Compose the header within your application. Please see the RCF manual for
details about the RCF syntax and functionality.
■
An Océ Windows or Autocad ADI driver can be used to generate both a
plottable file (e.g. HP-RTL, HP-GL/2) and the appropriate header with RCF
commands. Refer to the Océ Windows / Autocad Driver documentation for
further details.
■
The Océ Windows Plot Director application allows you to compose jobs
containing plottable files in a very flexible and user-friendly way. Refer to
the Océ Plot Director manual for further details.
Océ application
The following application is available:
Plot Director (MS-Windows 3.x, 95/98 and NT)
Océ drivers
Note:
Please refer to the Océ website (www.oce.com) for obtaining the latest
drivers.
ADI driver for AutoCAD R13C3 (Windows 95/98),
ADI driver for AutoCAD R13C4 (MS-DOS, Windows 95/98, NT 4.0),
ADI driver for AutoCAD R14 (Windows 95/98, NT 4.0),
HDI driver for AutoCad 2000 (Windows 95/98 and NT 4.0),
AutoCad LT: use a window system driver provided by Océ (e.g.; Windows
Raster Driver),
Windows Raster Driver (Windows 95/98 and NT),
PostScript driver (Windows 95/98, NT and Macintosh).
To Next Page
Loading...
