Oce 9300 - Replot Function; Setting Number of Copies

Advanced menu functions 79
Replot
Normally, files are discarded after being processed and printed. The replot
function overrides this feature, preventing the file from being discarded. To
make extra copies/prints from the operating panel, you must select ‘
REPLOT
ENABLE
’.
The default is ‘off’.
▼
Enabling replot
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
REPLOT
’ item using the or button
5
Press ‘next/select’ to enter the ‘
REPLOT
’ menu.
6
Select the required setting using the or button.
7
Press ‘next/select’ to confirm the setting.
8
Press ‘Program’ to exit the main menu.
Setting the number of copies
This option enables you to print multiple prints of the file currently stored in
the printer's memory. The default is 0, and a maximum of 99 prints can be
made using this option.
Note:
This option is active only when replotting is enabled.
▼
Defining the number of prints
1
Press ‘Program’ to enter the main menu.
2
Select the ‘#
COPIES
’ item using the or button.
3
Press ‘next/select’ to enter the ‘#
COPIES
’menu.
4
Select the required number of copies using the or button.
5
Press ‘next/select’ to confirm the number of copies.
6
Press ‘Program’ to exit the main menu.